Trips Related Articles

These are where users are in a permanent power scenario.

What is a 'permanent power scenario'?
This is when a car’s cigarette lighter socket (or whichever port you are using for Little LogBook) is permanently connected to power (it does not switch...
Tue, 9 Dec, 2014 at 4:19 PM
How to split continuous trips manually
 To split permanent power trips manually: Open the trip by double clicking on it Below the map and the speed graph, you will note the trip...
Tue, 9 Dec, 2014 at 2:02 PM
Combining trips
You can only combine consecutive trips. If there is a manual trip with the selected trips you will not be able to combine those trips. To combine trips: ...
Thu, 16 Apr, 2020 at 3:54 PM
Split combined trips
You can split combined trips back to their original state Right click on a combined trip Click split, this will open a map view Click save
Thu, 16 Apr, 2020 at 3:57 PM
Add Manual Trips
Missing trips can be manually captured using the “Add Manual Trip” function in the software (Beneath the “Trips” tab). Select a trip where you would like ...
Thu, 16 Apr, 2020 at 3:58 PM
Cleared device before downloading
That means you have lost all trips that were on the device and not downloaded. You will need to manually add missing trips.  Click on this link to see how...
Thu, 16 Apr, 2020 at 4:02 PM
Unknown Locations
If you are receiving unknown locations or unable to view trips on a map it could be one of the following:   1. Your computer was not connected to the inte...
Thu, 16 Apr, 2020 at 4:34 PM